NCP301HSN30T1G
| Parameters | |
|---|---|
| Base Part Number | NCP301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 3.0V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
NCP301HSN30T1G Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. As a reference, this IC management includes 1 functions for your convenience. A series of 1 channels can be found on this supervisor. As a reference, this IC power includes SOT-23-5 Thin, TSOT-23-5 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 1.5V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. In total, the power management has 5 pins in it. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. It is estimated that the voltage supervisor's supply current is 500nA. Additionally, IC management are a variety of features, for example [0], to name a few. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP301, which is the base power ics number. A maximum supply temperature of 1.3μA can be used.
NCP301HSN30T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301HSN30T1G Applications
There are a lot of ON Semiconductor NCP301HSN30T1G Voltage Supervisors applications.
- Rechargeable batteries
- DSP
- Microcontroller system
- WiFi router
- Sensitive sensors
- Transformer load monitoring equipment
- Kitchen appliances
- Household appliances
- Satellite navigation
- Battery cars
