NCP301LSN25T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 480nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.5V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.45V |
| Max Reset Threshold Voltage | 2.55V |
| Threshold Voltage | +2.5V |
| Undervoltage Threshold | 2.45V |
| Overvoltage Threshold | 2.55V |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP301LSN25T1G Overview
Power management is mounted through 5 terminals. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SOT-23-5 Thin, TSOT-23-5 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. The package peak reflow temperature is specified to be 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. Power management is included in the Surface Mount mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. Power management has a total of 5 pins. Power managment ic pin count is 5. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP301, which is the base power ics number.
NCP301LSN25T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN25T1G Applications
There are a lot of ON Semiconductor NCP301LSN25T1G Voltage Supervisors applications.
- Kitchen appliances
- Power distribution systems of CCU
- Microcontroller system
- Unattended substation automation
- Analog circuit
- Data storage applications
- Important electronics for automotive safety
- Detection of phase sequence
- Efficient information transmission
- Detection of phase imbalance
