Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 day ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-5 Thin, TSOT-23-5 |
Number of Pins |
5 |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
Simple Reset/Power-On Reset |
Terminal Finish |
Tin (Sn) |
Subcategory |
Power Management Circuits |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
1.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
NCP301 |
Output |
Open Drain or Open Collector |
Pin Count |
5 |
Number of Channels |
1 |
Max Supply Voltage |
10V |
Min Supply Voltage |
800mV |
Operating Supply Current |
500nA |
Nominal Supply Current |
500nA |
Max Supply Current |
1.3μA |
Adjustable Threshold |
NO |
Accuracy |
2 % |
Watchdog Timer |
No |
Reset |
Active Low |
Voltage - Threshold |
2.7V |
Number of Voltages Monitored |
1 |
Reset Timeout |
300 μs |
Halogen Free |
Halogen Free |
Min Reset Threshold Voltage |
2.646V |
Max Reset Threshold Voltage |
2.754V |
Threshold Voltage |
+2.7V |
Undervoltage Threshold |
2.646V |
Overvoltage Threshold |
2.754V |
Height |
1mm |
Length |
3mm |
Width |
1.5mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP301LSN27T1G Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SOT-23-5 Thin, TSOT-23-5 functions for you to refer to. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. During operation, the power ic is supplied with a voltage of 1.5V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount mounts power management on the wall. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 800mV for this IC power. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~125°C TA . During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. There is a 500nA supply current present in the power management. You can always use NCP301, the base supervisor number, to search for similar PMICs of the manufacturer. The power management can work with a maximum supply temperature of 1.3μA.
NCP301LSN27T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN27T1G Applications
There are a lot of ON Semiconductor NCP301LSN27T1G Voltage Supervisors applications.
- Precision measurement
- Medical-specific insulation monitor
- Medical-specific isolation transformer
- Digitally controlled LDO regulators circuit
- Military communications
- Power distribution systems of infant care room
- Analog circuit
- Leakage current detection
- Satellite navigation
- Low voltage/high power - AI, GPU