NCP301LSN28T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.8V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.744V |
| Max Reset Threshold Voltage | 2.856V |
| Threshold Voltage | +2.8V |
| Undervoltage Threshold | 2.74V |
| Overvoltage Threshold | 2.856V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP301LSN28T1G Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. A Tape & Reel (TR) package is used to package the power management. As a reference, this IC management includes 1 functions for your convenience. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The mount is attached to Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. There are 5 pins on the supervisor. It is recommended that Vsup should not be less than 800mV for this IC power. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. It is always advisable to use NCP301, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 1.3μA at the most.
NCP301LSN28T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN28T1G Applications
There are a lot of ON Semiconductor NCP301LSN28T1G Voltage Supervisors applications.
- Detection of phase loss
- DVR
- Urban rail transit weak current power monitoring
- Leakage current detection
- Medical-specific insulation monitor
- Satellite navigation
- Efficient information transmission
- Low voltage/high power - AI, GPU
- Microprocessor system
- Solar power charger
