NCP301LSN34T1G
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3.4V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3.332V |
| Max Reset Threshold Voltage | 3.468V |
| Threshold Voltage | +3.4V |
| Undervoltage Threshold | 3.332V |
| Overvoltage Threshold | 3.468V |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
NCP301LSN34T1G Overview
It is mounted through 5 terminals on the power management. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. In this IC management you will find SOT-23-5 Thin, TSOT-23-5 functions for you to refer to. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. During the reflow process, a peak temperature of 260 is specified for the package. IC management conducts in a 1.5V-voltage supply. In a 1 supply voltage, the PMIC chip conducts. By Surface Mount, IC management has been mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the supervisor. Supply voltage (Vsup) should be at least 800mV for this power management. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. This range of temperature should be set for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. The power management's supply current is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP301, the base PMIC number.
NCP301LSN34T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN34T1G Applications
There are a lot of ON Semiconductor NCP301LSN34T1G Voltage Supervisors applications.
- Rechargeable batteries
- Display equipment
- Transformer load monitoring equipment
- Solar power charger
- Magnetic resonance imaging
- Household appliances
- Stable power system
- Dash board
- Battery cars
- Consumer electronics
