NCP301LSN47T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP301 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 530nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.606V |
| Max Reset Threshold Voltage | 4.794V |
| Threshold Voltage | +4.7V |
| Undervoltage Threshold | 4.606V |
| Overvoltage Threshold | 4.794V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP301LSN47T1G Overview
There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. To assist you, this IC power includes 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. When 1.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 5 pins. There are 5 pins on the supervisor. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. Supplied with a operating current of 500nA, this PMIC is capable of fully function as specified. For similar manage ics search of the manufacturer, you can always refer to NCP301, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 1.4μA.
NCP301LSN47T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP301LSN47T1G Applications
There are a lot of ON Semiconductor NCP301LSN47T1G Voltage Supervisors applications.
- Household appliances
- Functional modules
- Insulation fault location system
- Leakage current detection
- Utility meter
- Electronics installed in the vehicle
- Smart meter
- Display equipment
- Electrical fire monitoring system
- WiFi router
