NCP3020ADR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Frequency | 300kHz |
| Base Part Number | NCP3020 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 5.5mA |
| Output Configuration | Positive |
| Output Current | 130mA |
| Voltage - Supply (Vcc/Vdd) | 4.7V~28V |
| Max Supply Current | 8mA |
| Input Voltage (Min) | 4.7V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Duty Cycle | 84 % |
| Duty Cycle (Max) | 84% |
| Clock Sync | No |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP3020ADR2G Overview
As a result of 8-SOIC (0.154, 3.90mm Width) compact design, the switching controller is compatible with most applications. For 1 outputs, the dc motor controller is appropriate. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4.7V~28V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~125°C TJ dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. A switching converters's terminal (s) sits at the DUAL position. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. In addition to "NCP3020", there are other relevant dc to dc converter ics you can find. 8 pins are on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator must be 4.7V. Test statistics indicate DC regulator outputs 600mV voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 130mA. voltage regulator dc to dcs with a 84 % duty cycle are designed to be reliable when powered on and powered off. This Surface Mount makes DC switcher suitable for most prototypes and applications. A frequency of 300kHz is used by the switching controller. The supply current of the voltage controller is 5.5mA. In the presence of a current greater than 8mA, the component may fail to operate properly and may be damaged.
NCP3020ADR2G Features
Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 84 %
Frequency: 300kHz
NCP3020ADR2G Applications
There are a lot of ON Semiconductor NCP3020ADR2G DC to DC converter applications.
- Current source circuits
- Motor controller circuits
- CNC system
- Handheld GPS
- Computed tomography (CT)
- Analog precision reference circuits
- Electric water heaters
- Radio equipment
- Wide-range voltage regulation circuits
- Overvoltage protection circuits in TV sets
