NCP302HSN18T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Tolerance | 2% |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP302 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Max Output Current | 70mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 480nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 1.8V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.764V |
| Max Reset Threshold Voltage | 1.836V |
| Threshold Voltage | +1.8V |
| Undervoltage Threshold | 1.764V |
| Overvoltage Threshold | 1.836V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP302HSN18T1G Overview
As you can see, this power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. Please find attached SOT-23-5 Thin, TSOT-23-5 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. When 1.5V is applied to the power ic, it conducts. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. Power management has a total of 5 pins. The pins of the power management system count 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 500nA is the recommended value. A similar IC managements number of the manufacturer can always be found by using NCP302, the base power ics number. A maximum supply temperature of 1.3μA can be used with this power management. Measurement and testing should take account of the nominal 2% tolerance this IC management.
NCP302HSN18T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP302HSN18T1G Applications
There are a lot of ON Semiconductor NCP302HSN18T1G Voltage Supervisors applications.
- Cloud computing
- Data storage applications
- Electronics installed in the vehicle
- Embedded computing
- Analog circuit
- Power distribution systems of operating room
- Electric heating appliances
- Low voltage/high power - AI, GPU
- Computer applications
- Military electronics
