NCP302LSN27T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP302 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Max Supply Current | 1.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.646V |
| Max Reset Threshold Voltage | 2.754V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.646V |
| Overvoltage Threshold | 2.754V |
| Length | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP302LSN27T1G Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 1 channels available on this supervisor, and each channel has a different function. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. Packages are specified to have an average peak reflow temperature of 260. During operation, the power ic is supplied with a voltage of 1.5V. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. There are a total of 5 pins on power management. 5 pins are on the supervisor. A voltage (Vsup) that doesn't fall below 800mV as the minimum supply voltage (Vsup) should be applied to this IC power in order to ensure its proper operation. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. A Surface Mount mounting type is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP302, the base PMIC number. Voltage supervisor can work with a supply temperature of 1.3μA at the most.
NCP302LSN27T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP302LSN27T1G Applications
There are a lot of ON Semiconductor NCP302LSN27T1G Voltage Supervisors applications.
- DC stabilized power supply module
- Sensitive sensors
- Radio
- Insulation fault location system
- Rechargeable batteries
- Utility meter
- Medical-specific isolation transformer
- Power distribution systems of CCU
- Data storage applications
- Personal computers
