NCP302LSN40T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Additional Feature | DETECTION THRESHOLD VOLTAGE IS 4.0V |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP302 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 5 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 500nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 3.92V |
| Max Reset Threshold Voltage | 4.08V |
| Threshold Voltage | +4V |
| Undervoltage Threshold | 3.92V |
| Overvoltage Threshold | 4.08V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP302LSN40T1G Overview
There are 5 terminals on this power management that allow it to be mounted. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. There are a total of 1 channels on this supervisor, and they are arranged in a series. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. As specified in the package specification, the peak reflow temperature of the package is set at 260. The supervisor is always powered by a 1.5V volt supply. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, it has 5 pins on IC management. 5 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. Temperature setting for the supervisors should be -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. There is a 500nA supply current present in the power management. Among other features, IC power can be also taken advantage of [0], for instance. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP302, which is the base power ics number.
NCP302LSN40T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP302LSN40T1G Applications
There are a lot of ON Semiconductor NCP302LSN40T1G Voltage Supervisors applications.
- Consumer electronics
- Leakage protection
- Data storage applications
- Electrical fire monitoring system
- Cloud computing
- Radio
- Fire equipment power monitoring system
- Insulation fault location system
- Detection of phase sequence
- Dash board
