NCP303LSN10T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP303 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 550mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 450nA |
| Output Current | 70mA |
| Max Supply Current | 1.2μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1V |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 980mV |
| Max Reset Threshold Voltage | 1.02V |
| Threshold Voltage | +1V |
| Undervoltage Threshold | 980mV |
| Overvoltage Threshold | 1.02V |
| Max Junction Temperature (Tj) | 150°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP303LSN10T1G Overview
A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are 1 channels on this power managment ic that can be found in a series. Please find attached SOT-23-5 Thin, TSOT-23-5 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 550mV volts. The maximum supply voltage (Vsup) is not to exceed 10V volts in this IC management. The recommended mounting type is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 500nA. For similar manage ics search of the manufacturer, you can always refer to NCP303, the base PMIC number. The maximum supply temperature that PMIC chip can work with is 1.2μA. This IC management's architecture allows for 1 outputs.
NCP303LSN10T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 550mV
500nA operating supply current
NCP303LSN10T1G Applications
There are a lot of ON Semiconductor NCP303LSN10T1G Voltage Supervisors applications.
- Network equipment
- Power distribution systems of CCU
- Leakage current detection
- Linux and server computing
- Household appliances
- Rechargeable batteries
- Efficient information transmission
- Digitally controlled LDO regulators circuit
- Medical-specific insulation monitor
- Embedded computing
