NCP303LSN45T1G
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP303 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Max Output Current | 2mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 520nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.5V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.41V |
| Max Reset Threshold Voltage | 4.59V |
| Threshold Voltage | +4.5V |
| Undervoltage Threshold | 4.41V |
| Overvoltage Threshold | 4.59V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
NCP303LSN45T1G Overview
This power management consists of 5 mounting terminals on which it can be mounted. Power management is packaged in a Tape & Reel (TR) way. To assist you, this IC power includes 1 functions. There are 1 channels available on this supervisor, and each channel has a different function. Please refer to power management for SOT-23-5 Thin, TSOT-23-5 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 1.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. A total of 5 pins are located on this power management. Pin count of the power management is 5. It is recommended that Vsup should not be less than 800mV for this IC power. Voltage (Vsup) shouldn't exceed 10V volts in this PMIC. Power management recommends the Surface Mount mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While this power management is operating, it will output Open Drain or Open Collector as the output voltage. The supply current of the power management is 500nA. A similar IC managements number of the manufacturer can always be found by using NCP303, the base power ics number. Voltage supervisor can work with a supply temperature of 1.4μA at the most.
NCP303LSN45T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
NCP303LSN45T1G Applications
There are a lot of ON Semiconductor NCP303LSN45T1G Voltage Supervisors applications.
- Leakage protection
- Precision measurement
- Satellite navigation
- Radar
- Embedded computing
- DVR
- Microprocessor system
- Multi-voltage system
- Dash board
- Stable power system
