NCP303LSN47T1G
| Parameters | |
|---|---|
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Current Rating | 70mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP303 |
| Output | Open Drain or Open Collector |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Voltage | 12.3V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 500nA |
| Nominal Supply Current | 530nA |
| Max Supply Current | 1.4μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 4.7V |
| Reset Timeout | Adjustable/Selectable |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 4.606V |
| Max Reset Threshold Voltage | 4.794V |
| Threshold Voltage | +4.7V |
| Undervoltage Threshold | 4.606V |
| Overvoltage Threshold | 4.794V |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
NCP303LSN47T1G Overview
As you can see, this power management is mounted through 5 terminals. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this PMIC, you can find SOT-23-5 Thin, TSOT-23-5 functions for your reference. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 260 is specified for the package. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. The supervisor's supply current is specified to 500nA. To find similar IC managements from the manufacturer, you can always search by NCP303. A maximum supply temperature of 1.4μA can be used with this power management. This IC management's architecture supports 1 outputs. There is a current rating of 70mA for this IC management.
NCP303LSN47T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current
Current rating of 70mA
NCP303LSN47T1G Applications
There are a lot of ON Semiconductor NCP303LSN47T1G Voltage Supervisors applications.
- FPGA design
- Computer applications
- Microcontroller system
- Radar
- Leakage current detection
- Consumer electronics
- Set top box
- Important electronics for automotive protection
- Unattended substation automation
- Rechargeable batteries
