NCP304HSQ20T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 15 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP304 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1.1μA |
| Max Supply Current | 3.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 1.96V |
| Max Reset Threshold Voltage | 2.04V |
| Threshold Voltage | +2V |
| Undervoltage Threshold | 1.96V |
| Overvoltage Threshold | 2.04V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP304HSQ20T1G Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. There is a Tape & Reel (TR)-packaging method applied to IC management. Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please find attached SC-82A, SOT-343 functions for your reference in this IC power. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. In a 1 supply voltage, the PMIC chip conducts. The power management is mounted by a Surface Mount-axis. This power ic can be sub-categorized as Power Management Circuits. In total, the power management has 4 pins in it. The pins of the power management system count 4. It is recommended that Vsup should not be less than 800mV for this IC power. The supply voltage (Vsup) should not exceed 10V volts in this IC power. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The temperature of the supervisors should be set to this range: -40°C~85°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. There is a supply current of 1μA for the power management. For similar manage ics search of the manufacturer, you can always refer to NCP304, the base PMIC number. At most, voltage supervisor can operate at a supply temperature of 3.3μA.
NCP304HSQ20T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304HSQ20T1G Applications
There are a lot of ON Semiconductor NCP304HSQ20T1G Voltage Supervisors applications.
- Refrigeration
- DSP
- Detection of phase sequence
- Detection of phase loss
- Smart meter
- Solar power charger
- Smartphones
- Microcontroller system
- Leakage current detection
- Urban rail transit weak current power monitoring
