NCP304HSQ27T1G
| Parameters | |
|---|---|
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP304 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1.1μA |
| Max Supply Current | 3.3μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active High |
| Voltage - Threshold | 2.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.646V |
| Max Reset Threshold Voltage | 2.754V |
| Threshold Voltage | +2.7V |
| Undervoltage Threshold | 2.646V |
| Overvoltage Threshold | 2.754V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
NCP304HSQ27T1G Overview
There are 4 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. The purpose of this IC power is to provide you with a reference of SC-82A, SOT-343 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. There is a subcategory called Power Management Circuits for this power management. It has a total of 4 pins that are attached to IC management. 4 pins are on the supervisor. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount mounting is recommended. The supervisors should be set to the following temperature: -40°C~85°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. In order to maintain a stable supply current for the power management, 1μA is the recommended value. To find similar IC managements from the manufacturer, you can always search by NCP304. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.3μA.
NCP304HSQ27T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP304HSQ27T1G Applications
There are a lot of ON Semiconductor NCP304HSQ27T1G Voltage Supervisors applications.
- WiFi router
- Telecommunications equipment
- Battery cars
- Automotive permanent magnet synchronous motors
- FPGA design
- Solar power charger
- Electric heating appliances
- Cloud computing
- Functional modules
- Low voltage/high power - AI, GPU
