NCP304LSQ30T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Current Rating | 70mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP304 |
| Output | Push-Pull, Totem Pole |
| Pin Count | 4 |
| Output Voltage | 300mV |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 1.2μA |
| Nominal Supply Current | 1.2μA |
| Max Supply Current | 3.6μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP304LSQ30T1G Overview
There are 4 mounting terminals on the voltage supervisor, each of which has a different function. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-82A, SOT-343 functions for your convenience. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. As specified in the package specification, the peak reflow temperature of the package is set at 260. When a supply voltage of 1.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The mount is attached to Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 4. There are 4 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~85°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. The power management's supply current is 1.2μA. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP304, which is the base power ics number. At the most, voltage supervisor can work with a supply temperature of 3.6μA. As far as the current rating is concerned, this IC power can handle up to 70mA currents.
NCP304LSQ30T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1.2μA operating supply current
Current rating of 70mA
NCP304LSQ30T1G Applications
There are a lot of ON Semiconductor NCP304LSQ30T1G Voltage Supervisors applications.
- Microcontroller system
- Power distribution systems of infant care room
- Multi-voltage system
- Utility meter
- Data storage applications
- Efficient information transmission
- Power distribution systems of ICU
- Household appliances
- Electrical fire monitoring system
- Detection of phase sequence
