NCP305LSQ17T1G
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP305 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 900nA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.7V |
| Number of Voltages Monitored | 1 |
| Halogen Free | Halogen Free |
| Supply Current-Max (Isup) | 0.0033mA |
| Min Reset Threshold Voltage | 1.666V |
| Max Reset Threshold Voltage | 1.734V |
| Threshold Voltage | +1.7V |
| Undervoltage Threshold | 1.666V |
| Overvoltage Threshold | 1.734V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
NCP305LSQ17T1G Overview
It is mounted through 4 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-82A, SOT-343 functions for your reference. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. In a 1.5V supply voltage, the power management conducts. IC management conducts in a 1-voltage supply. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 4 pins on IC management. There are 4 pins on the power managment ic. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 800mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~85°C TA . Power management has an output of Open Drain or Open Collector during operation. For this power management, there is an 1μA volt supply current. If you want to search for similar IC managements of this manufacturer, you can always refer to NCP305, which is the base power ics number.
NCP305LSQ17T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
NCP305LSQ17T1G Applications
There are a lot of ON Semiconductor NCP305LSQ17T1G Voltage Supervisors applications.
- Microcontroller system
- Fire equipment power monitoring system
- Insulation fault location system
- Computer applications
- Electrical fire monitoring system
- Functional modules
- Consumer electronics
- Detection of phase imbalance
- Digitally controlled LDO regulators circuit
- Leakage current detection
