NCP305LSQ30T1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-82A, SOT-343 |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Tin (Sn) |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.5V |
| Current Rating | 70mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP305 |
| Output | Open Drain or Open Collector |
| Pin Count | 4 |
| Output Voltage | 12.3V |
| Max Output Current | 2.5mA |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 800mV |
| Operating Supply Current | 1μA |
| Nominal Supply Current | 1.2μA |
| Max Supply Current | 3.6μA |
| Adjustable Threshold | NO |
| Accuracy | 2 % |
| Watchdog Timer | No |
| Max Output Voltage | 12.3V |
| Reset | Active Low |
| Voltage - Threshold | 3V |
| Number of Voltages Monitored | 1 |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Min Reset Threshold Voltage | 2.94V |
| Max Reset Threshold Voltage | 3.06V |
| Threshold Voltage | +3V |
| Undervoltage Threshold | 2.94V |
| Overvoltage Threshold | 3.06V |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP305LSQ30T1G Overview
This power management consists of 4 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-82A, SOT-343 functions included in this PMIC so that you can refer to them. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. According to the specification, the package's peak reflow temperature is specified to be 260. During operation, the power ic is supplied with a voltage of 1.5V. When a supply voltage of 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. Power management has a total of 4 pins. There are 4 pins on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 800mV volts. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 1μA. A similar IC managements number of the manufacturer can always be found by using NCP305, the base power ics number. A maximum supply temperature of 3.6μA can be used. 70mA currents are rated for the IC management.
NCP305LSQ30T1G Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current
Current rating of 70mA
NCP305LSQ30T1G Applications
There are a lot of ON Semiconductor NCP305LSQ30T1G Voltage Supervisors applications.
- Smart meter
- Refrigeration
- Personal computers
- Set top box
- FPGA design
- Solar power charger
- Power distribution systems of ICU
- Leakage protection
- Detection of phase loss
- Urban rail transit weak current power monitoring
