NCP3066PG
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | 0°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Type | DC DC Regulator |
| Terminal Finish | TIN |
| Applications | Lighting |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 150kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | COMMERCIAL |
| Input Voltage-Nom | 5V |
| Input Voltage (Min) | 3V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Input Voltage (Max) | 40V |
| Control Technique | PULSE WIDTH MODULATION |
| Current - Output / Channel | 1.5A Switch |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Voltage - Supply (Max) | 40V |
| Voltage - Supply (Min) | 3V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP3066PG Overview
The board's 8-DIP (0.300, 7.62mm) package saves space. For the design of these LED drivers, 1 outputs are used.It adopts the way of Through Hole for mounting.With high efficiency, it appears as a DC DC Regulator.The led light driver is capable of operating at the operating temperature of 0°C~85°C TA.There are considerable benefits for Lighting.As a result, it operates based on the frequency of 150kHz.In this case, it uses 8 terminations.Undetermined failures may occur if the voltage supply falls below 3V.In addition, it has 8 pins.40V is the maximum value of supply voltage it offers.Operation of the device requires 5V volts to be applied to the circuit.When the input voltage is greater than or equal to 3V, the operation of this device is greatly simplified.Input voltages below 40V can assure high stability.
NCP3066PG Features
Available in the 8-DIP (0.300, 7.62mm) package
Operating temperature of 0°C~85°C TA
Frequency of 150kHz
NCP3066PG Applications
There are a lot of Rochester Electronics, LLC NCP3066PG LED Driver ICs applications.
- White LED Backlight for portable equipment
- Gallery lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- General lighting
- LED Lightings for Inspection Devices
- Dimmable LED for vehicle interiors
- Constant Voltage Power Source for portable equipment
- Amusement Machines
- LED Lightings for Industrial Equipment
- Scanners and Handy Terminals
