NCP3170BDR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Base Part Number | NCP3170 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 18V |
| Output Voltage | 5V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Both |
| Min Output Voltage | 1.25V |
| Voltage - Output (Max) | 17.28V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP3170BDR2G Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. As you can see, this harley voltage regulator contains 8 terminations. There is one type of analog IC that this voltage regulator is equipped with, and that is the SWITCHING REGULATOR type. The harley voltage regulator is available as a 8-SOIC (0.154, 3.90mm Width) package to save space. There are 1 outputs configured on the voltage regulator. On the output pins of this DC DC switching regulator, there is a Adjustable output generated. A voltage regulator 12v such as this one fits the Surface Mount mounting bracket. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. A DC-DC switching regulator such as this one switches at 1MHz. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. As far as the voltage input is concerned, DC DC switching regulator can accept up to 18V. For operation, voltage regulator provides a nominal input voltage of 12V. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. There is a DC/DC regulator in this family that belongs to the NCP3170 family. The voltage DC DC switching regulator can provide is up to 5V volts. There are 8 pins that are used for the operation of the voltage regulator 12v. The output voltage for this switching regulator should be kept at 1.25V at least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 3A A. On the basis of the maximum output voltage of 17.28V, adjusting voltage regulator can be operated easily. With a maximum output voltage of 5V, DC DC switching regulator has a very high efficiency.
NCP3170BDR2G Features
1 outputs
8 pins
NCP3170BDR2G Applications
There are a lot of ON Semiconductor NCP3170BDR2G Voltage Regulators applications.
- ATMs
- Network technology
- Hydrogen power
- Laboratories
- Die casting equipment
- Servo drive system
- Smoke prevention equipment
- Surge protection circuits
- Cutting machine tools
- Post equipment
