Parameters |
Published |
2008 |
JESD-609 Code |
e1 |
Feature |
Slew Rate Controlled |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
4 |
Resistance |
26mOhm |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Power Rating |
225mW |
Max Power Dissipation |
580mW |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.5mm |
Base Part Number |
NCP330 |
Pin Count |
4 |
Number of Outputs |
1 |
Output Type |
N-Channel |
Max Output Current |
3A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Voltage |
5.5V |
Interface |
On/Off |
Analog IC - Other Type |
SPST |
Current |
5A |
Output Configuration |
High Side |
Power Dissipation |
580mW |
Output Current |
3A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
3A |
Input Type |
Non-Inverting |
Switch Type |
General Purpose |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
1.8V~5.5V |
Rds On (Typ) |
26m Ω |
Height |
500μm |
Length |
1.2mm |
Width |
1.6mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
4-UFDFN Exposed Pad |
Number of Pins |
4 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Tape & Reel (TR) |
NCP330MUTBG Overview
It is package in Tape & Reel (TR) case.The 4-UFDFN Exposed Pad package contains it.In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage is N-Channel volts.A lighting driver with Slew Rate Controlled features is available.I believe it belongs to the NCP330 family.A total of 4 terminations can be found in it.The 4 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.In order to meet the operation criteria, the maximum output current drops to 3A.The supply voltage of 5V is conducive to high efficiency.As a result, it is mounted in the manner of Surface Mount.The LED driver has a total of 4 pins.It has a resistance of 26mOhm.When this is the case, the output current is set to 3A.This gadget uses an analog IC, which is SPST in this case.There are a total of 1 available channels.It is recommended that the supply voltage be set at 5.5V in order to achieve maximum efficiency.This system has a maximum current requirement of 3A.
NCP330MUTBG Features
Supplied from 5V
Resistance of 26mOhm
1 channels
NCP330MUTBG Applications
There are a lot of ON Semiconductor NCP330MUTBG Power Switches ICs applications.
- Low Voltage I/O System Power
- HDD and SSD
- USB Power Distribution
- Smart Phones, Feature Phones
- Portable Music Players
- PDAs
- Set-top-box
- Smartphone and PDA
- Hot Swap
- Various applications equipped with buttons