banner_page

NCP333FCT2G

P-Channel PMIC 4 Pin 3.3V 4-UFBGA, WLCSP


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP333FCT2G
  • Package: 4-UFBGA, WLCSP
  • Datasheet: PDF
  • Stock: 261
  • Description: P-Channel PMIC 4 Pin 3.3V 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Terminal Form BALL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 3.3V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 4
Number of Outputs 1
Qualification Status Not Qualified
Output Type P-Channel
Max Output Current 1.5A
Operating Supply Voltage 5.5V
Interface On/Off
Output Configuration High Side
Power Dissipation 400mW
Output Current 1.5A
Voltage - Supply (Vcc/Vdd) Not Required
Max Supply Current 1.5A
Input Type Non-Inverting
Turn On Delay Time 195 μs
Switch Type General Purpose
Halogen Free Halogen Free
Nominal Input Voltage 5.5V
Ratio - Input:Output 1:1
Voltage - Load 1.2V~5.5V
Driver Number of Bits 1
Output Peak Current Limit-Nom 2A
Rds On (Typ) 45m Ω
High Side Driver YES
Height Seated (Max) 0.63mm
Length 0.76mm
Width 0.76mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 4-UFBGA, WLCSP
Number of Pins 4
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
Published 2014
Feature Load Discharge, Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 4
ECCN Code EAR99
Resistance 400mOhm
Subcategory Peripheral Drivers
Max Power Dissipation 400mW
Terminal Position BOTTOM

NCP333FCT2G Overview


The package is in the form of a Tape & Reel (TR).There is a package for it in the 4-UFBGA, WLCSP package.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.A voltage of Not Required is used to power it.It produces a maximum output voltage of P-Channel volts at its maximum output.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.The termination count is 4.The 4 pins are used to operate the LED driver.There are 1 functions of the LED driver.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The supply voltage of 3.3V is conducive to high efficiency.Surface Mount is mounted in the way.As a result, it has a total of 4 pins.In this LED driving board, there is 400mOhm resistance.This results in a 1.5A output current.A self-contained container with a capacity of Peripheral Drivers contains this lighting driver.In order to maximize efficiency, the supply voltage should be set at 5.5V.1.5A is the maximum current required to operate it.

NCP333FCT2G Features


Supplied from 3.3V
Resistance of 400mOhm

NCP333FCT2G Applications


There are a lot of ON Semiconductor NCP333FCT2G Power Switches ICs applications.

  • USB3.1 Power Delivery
  • Hot Swaps
  • Notebook and Tablet Computers
  • Handheld Devices
  • PC Cards
  • Smart Phones, Feature Phones
  • PDAs
  • Mobile Communication Devices
  • Portable Devices
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good