NCP337FCT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 13 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFBGA, WLCSP |
| Number of Pins | 6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e1 |
| Feature | Load Discharge, Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 120mOhm |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Power Dissipation | 660mW |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 3A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Output Configuration | High Side |
| Power Dissipation | 660mW |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 3A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.13 ms |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.2V~5.5V |
| Rds On (Typ) | 20 Ω |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP337FCT2G Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 6-UFBGA, WLCSP.The LED driver is mounted as Surface Mount.General Purpose is the type of switch owned by it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.The LED driver is equipped with 1 outputs.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of P-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Load Discharge, Slew Rate Controlled features in order for it to be useful.In order to operate, 6 pins are used.Maximum output current falls to 3A when operation criteria are met.Surface Mount is mounted in the way.This LED driver is equipped with a total of 6 pins.The LED driver has 120mOhm resistance.As a result, the output current is set to 3A.In this case, the analog IC is SPST.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.This system has a maximum current requirement of 3A.
NCP337FCT2G Features
Resistance of 120mOhm
NCP337FCT2G Applications
There are a lot of ON Semiconductor NCP337FCT2G Power Switches ICs applications.
- Wearable Devices
- HDD, SSD
- Smart Phones, Feature Phones
- Solid State Drivers
- Portable/Handheld Devices
- Notebook and Tablet Computers
- USB Power Distribution
- Mobile Communication Devices
- Wireless Headsets
- Low Voltage I/O System Power
