banner_page

NCP380HMU05AATBG

P-Channel PMIC NCP380 6 Pin 5V 6-UDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP380HMU05AATBG
  • Package: 6-UDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 735
  • Description: P-Channel PMIC NCP380 6 Pin 5V 6-UDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 6-UDFN Exposed Pad
Number of Pins 6
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2011
JESD-609 Code e3
Feature Slew Rate Controlled, Status Flag
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 6
ECCN Code EAR99
Resistance 110mOhm
Terminal Finish Tin (Sn)
Max Power Dissipation 830mW
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number NCP380
Pin Count 6
Number of Outputs 1
Output Type P-Channel
Max Output Current 2.1A
Operating Supply Voltage 5.5V
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Output Configuration High Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 4 ms
Switch Type General Purpose
Min Input Voltage 2.5V
Number of Inputs 2
Max Input Voltage 5.5V
Halogen Free Halogen Free
Nominal Input Voltage 5.5V
Turn-Off Delay Time 3 ms
Ratio - Input:Output 1:1
Voltage - Load 2.5V~5.5V
Fault Protection Current Limiting (Fixed), UVLO
Rds On (Typ) 55m Ω
Height 500μm
Length 2mm
Width 2mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP380HMU05AATBG Overview


It's?packaged?in?the way?of?a?Tape & Reel (TR).The 6-UDFN Exposed Pad package contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.There is a NCP380 family of things that it belongs to.A total of 6 terminations can be found in it.The operation is performed through the 6 pins.As far as the lighting driver is concerned, there are 1 functions.To meet the operation criteria, the maximum output current drops to 2.1A.Using a voltage of 5V allows for high efficiency.In this case, it is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 6 pins.In this case, there is 110mOhm resistance in the LED driving board.In this case, the output current is set to 500mA.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.A supply voltage of 5.5V is recommended for maximum efficiency.This LED driver can handle voltages up to 5.5V volts.It requires 2.5V volts as the minimum input voltage.The lighting driver is equipped with 2 inputs.

NCP380HMU05AATBG Features


Supplied from 5V
Resistance of 110mOhm
1 channels

NCP380HMU05AATBG Applications


There are a lot of ON Semiconductor NCP380HMU05AATBG Power Switches ICs applications.

  • Gaming
  • USB3.1 Power Delivery
  • Portable Video Game Players
  • Telecom and Network Systems
  • Hard Disk Drives
  • HDD, SSD
  • USB Protection
  • PC Card Hot Swap
  • USB Power Distribution
  • HDD and SSD

Write a review

Note: HTML is not translated!
    Bad           Good