NCP380HMU10AATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380HMU10AATBG Overview
The package is in the form of a Tape & Reel (TR).There is a package for it in the 6-UDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.The lighting driver has Slew Rate Controlled, Status Flag features.It is a member of the NCP380 family.It has a total of 6 terminations.6 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.1A.Using a voltage of 5V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.A total of 6 pins are included in this LED driver.It has a resistance of 110mOhm.The output current is set to 1A in this case.The gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.To choose from, there are 1 channels.The supply voltage should be set at 5.5V for best efficiency.Input voltage is limited to 5.5V volts.The input voltage minimum is 2.5V volts.Currently, there are 2 inputs available.
NCP380HMU10AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380HMU10AATBG Applications
There are a lot of ON Semiconductor NCP380HMU10AATBG Power Switches ICs applications.
- Storage Drives
- Solid State Drivers
- Various applications equipped with buttons
- Smartphone and PDA
- Set-Top Boxes
- Telecom and Network Systems
- Portable Music Players
- USB Ports/Hubs
- HDD and SSD
- Wireless Modem Data Cards
