NCP380HMU15AATBG
| Parameters | |
|---|---|
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1.5A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
NCP380HMU15AATBG Overview
Tape & Reel (TR) is how it's packaged.Package 6-UDFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver is equipped with 1 outputs.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.The lighting driver has Slew Rate Controlled, Status Flag features.It is part of the NCP380 family of LED drivers.It contains 6 terminations.The operation is carried out using the 6 pins.As far as the lighting driver is concerned, there are 1 functions.The maximum output current must drop to 2.1A to meet the operation criteria.A supply voltage of 5V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 6 pins.There is 110mOhm resistance on the LED driver.This results in a 1.5A output current.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.In total, 1 channels are available.For maximum efficiency, the supply voltage should be set to 5.5V.The maximum input voltage is 5.5V volts.It requires 2.5V volts as the minimum input voltage.A total of 2 inputs are available.
NCP380HMU15AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380HMU15AATBG Applications
There are a lot of ON Semiconductor NCP380HMU15AATBG Power Switches ICs applications.
- HDD and SSD
- Mobile Communication Devices
- Storage (HDDs, SSDs)
- USB Power Distribution
- USB Ports/Hubs
- Hot Swaps
- Wireless Headsets
- USB Power Distribution
- Portable Video Game Players
- USB3.1 Power Delivery
