NCP380HMU20AATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 75mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 2A |
| Output Configuration | High Side |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380HMU20AATBG Overview
Tape & Reel (TR) is how it's packaged.There is a 6-UDFN Exposed Pad package that includes it.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has a total of 1 outputs.A voltage of Not Required is used to power it.A maximum output voltage of P-Channel volts can be achieved by this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It is part of the NCP380 family of LED drivers.It contains 6 terminations.In order to operate, the 6 pins are used.The LED driver has 1 functions.2AV is the maximum output of the LED driver.High efficiency is possible at 5V supply voltage.It is mounted in the way of Surface Mount.It is equipped with a total of 6 pins.Currently, the LED driving board has a resistance of 75mOhm ohms.This case has the output current set to 2.1A.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.A total of 1 channels are available for you to choose from.In order to maximize efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.As a minimum input voltage, it requires 2.5V volts.For its operation, a maximum current requirement of 90μA is required.
NCP380HMU20AATBG Features
Supplied from 5V
Resistance of 75mOhm
1 channels
NCP380HMU20AATBG Applications
There are a lot of ON Semiconductor NCP380HMU20AATBG Power Switches ICs applications.
- Portable Video Game Players
- Set-top-box
- Hot Swap
- Portable GPS Device
- Low Voltage I/O System Power
- Telecom and Network Systems
- Smart Phones, Feature Phones
- PDAs
- HDD, SSD
- Wearable Devices
