NCP380HMU21AATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2.1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 90μA |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 55m Ω |
| Height Seated (Max) | 0.55mm |
| Length | 2mm |
| Width | 2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380HMU21AATBG Overview
It is packaged in the manner of a Tape & Reel (TR).The 6-UDFN Exposed Pad package includes it.This LED driving board is mounted using the mounting type Surface Mount.A General Purpose switch type is owned by it.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.It is possible to use 1 outputs in the lighting driver.A voltage of Not Required is used to power it.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the NCP380 family.It has a total of 6 terminations.The 6 pins are used for the operation of the system.Currently, there are 1 functions associated with the lighting driver.The maximum output current must drop to 2.1A to meet the operation criteria.High efficiency is possible at 5V supply voltage.The lighting driver is mounted in the direction of Surface Mount.6 pins are equipped with it.Lighting drivers with 110mOhm resistance are used.In this case, the output current is set to 2.1A.In this lighting driver, POWER SUPPLY SUPPORT CIRCUIT is the analog IC.We offer 1 channels in total.The supply voltage should be set at 5.5V for best efficiency.The maximum input voltage is 5.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.There is a maximum current requirement of 90μA for its operation.
NCP380HMU21AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380HMU21AATBG Applications
There are a lot of ON Semiconductor NCP380HMU21AATBG Power Switches ICs applications.
- USB Power Distribution
- PC Cards
- HDD, SSD
- Hot Swaps
- Hot Swap
- Wireless Modem Data Cards
- Hard Disk Drives
- Handheld Devices
- Storage Drives
- Set-Top Boxes
