NCP380HSN05AAT1G
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 325mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
NCP380HSN05AAT1G Overview
A Tape & Reel (TR) is used to package it.It is included in the package SOT-23-5 Thin, TSOT-23-5.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It belongs to the family NCP380.A total of 5 terminations have been recorded.During operation, the 5 pins are used.The LED driver has 1 functions.In order to meet the operation criteria, the maximum output current drops to 1A.A supply voltage of 5V leads to high efficiency.It is positioned in the direction of Surface Mount.It is equipped with a total of 5 pins.Currently, the LED driving board has a resistance of 135mOhm ohms.As a result, the output current is set to 500mA.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.For maximum efficiency, the supply voltage should be set to 5.5V.Voltage input is limited to 5.5V volts.A voltage of 2.5V volts is the minimum input voltage.A total of 2 inputs are available.
NCP380HSN05AAT1G Features
Supplied from 5V
Resistance of 135mOhm
1 channels
NCP380HSN05AAT1G Applications
There are a lot of ON Semiconductor NCP380HSN05AAT1G Power Switches ICs applications.
- Smartphone and PDA
- Wireless Headsets
- Various applications equipped with buttons
- Hot Swap
- Low Voltage I/O System Power
- Portable Devices
- Portable GPS Device
- Portable Music Players
- Wireless Modem Data Cards
- USB Power Distribution
