NCP380HSNAJAAT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 350mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Current Rating | 2.1A |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | Adjustable |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), UVLO |
| Rds On (Typ) | 70m Ω |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| Height | 1.1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380HSNAJAAT1G Overview
Tape & Reel (TR) is how it's packaged.Package SOT-23-6 Thin, TSOT-23-6 contains it.A Surface Mount mounting is used for the LED driving board.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.By default, it is set to output 1.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.There is a NCP380 family of things that it belongs to.A total of 6 terminations can be found in it.6 pins are used for operation.As far as the lighting driver is concerned, there are 1 functions.There is a maximum output of AdjustableV from the LED driver.To meet the operation criteria, the maximum output current drops to 1A.It is possible to obtain high efficiency with a supply voltage of 5V.The lighting driver is mounted in the direction of Surface Mount.6 pins are connected to it in total.The LED driver has 135mOhm resistance.This results in a 1A output current.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.It requires 2.5V volts as the minimum input voltage.2 inputs are provided.
NCP380HSNAJAAT1G Features
Supplied from 5V
Resistance of 135mOhm
1 channels
NCP380HSNAJAAT1G Applications
There are a lot of ON Semiconductor NCP380HSNAJAAT1G Power Switches ICs applications.
- Storage Drives
- Various applications equipped with buttons
- Hot Swap
- Portable Music Players
- HDD and SSD
- Wireless Modem Data Cards
- Mobile Communication Devices
- Portable Video Game Players
- Set-top-box
- Portable GPS
