Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UDFN Exposed Pad |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2005 |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
110mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NCP380 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2.1A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
500mA |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
4 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Halogen Free |
Halogen Free |
Turn-Off Delay Time |
3 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Fixed), UVLO |
Rds On (Typ) |
55m Ω |
Height |
500μm |
Length |
2mm |
Width |
2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP380LMU05AATBG Overview
Tape & Reel (TR) is how it's packaged.It is included with the 6-UDFN Exposed Pad package as well.The lighting driver has the mounting type Surface Mount.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the NCP380 family.A total of 6 terminations have been found in it.During operation, the 6 pins are used.It contains 1 functions.To comply with the operation criteria, the maximum output current is reduced to 2.1A.High efficiency is possible when the supply voltage is set to 5V.Surface Mount is mounted in the way.A total of 6 pins are included in this LED driver.Lighting drivers with 110mOhm resistance are used.It is set to 500mA in this case.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.The total number of channels is 1.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driver can handle voltages up to 5.5V volts.The minimum input voltage is 2.5V volts.With 2 inputs, it is equipped.
NCP380LMU05AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380LMU05AATBG Applications
There are a lot of ON Semiconductor NCP380LMU05AATBG Power Switches ICs applications.
- Smart Phones, Feature Phones
- PDAs
- Gaming
- Portable Devices
- HDD, SSD
- USB Protection
- Telecom and Network Systems
- HDD and SSD
- Portable Video Game Players
- Portable/Handheld Devices