Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
LAST SHIPMENTS (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UDFN Exposed Pad |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Cut Tape (CT) |
Published |
2011 |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
110mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Current Rating |
1.5A |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NCP380 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2.1A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Output Configuration |
High Side |
Output Current |
1.5A |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
4 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Halogen Free |
Halogen Free |
Turn-Off Delay Time |
3 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Fixed), UVLO |
Rds On (Typ) |
55m Ω |
Height |
500μm |
Length |
2mm |
Width |
2mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP380LMU15AATBG Overview
It is packaged in the form of a Cut Tape (CT).There is a package for it in the 6-UDFN Exposed Pad package.The mounting type of the LED driver is Surface Mount.A General Purpose switch type is owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.It is equipped with Slew Rate Controlled, Status Flag features.This object belongs to the NCP380 family.As a result, there are 6 terminations.For operation, we use the 6 pins.It consists of 1 functions.As a result, the maximum output current is reduced to 2.1A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The LED driving board is mounted in the way of Surface Mount.There are 6 pins in total on this board.It has 110mOhm resistance.In this case, the output current is set to 1.5A.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.A total of 1 channels are available for you to choose from.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.A maximum input voltage of 5.5V volts can be applied to it.There is a minimum input voltage of 2.5V volts.We have available 2 inputs.
NCP380LMU15AATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380LMU15AATBG Applications
There are a lot of ON Semiconductor NCP380LMU15AATBG Power Switches ICs applications.
- Set-Top Boxes
- Hot Swap
- Smart Phones, Feature Phones
- Hot Swaps
- USB Power Distribution
- Handheld Devices
- Notebook PC
- Solid State Drivers
- PDAs
- Hot Swap