Parameters |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-UDFN Exposed Pad |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2012 |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
75mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
830mW |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
NCP380 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
2A |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Max Supply Current |
90μA |
Adjustable Threshold |
NO |
Input Type |
Non-Inverting |
Turn On Delay Time |
4 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
5.5V |
Halogen Free |
Halogen Free |
Turn-Off Delay Time |
3 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Fixed), UVLO |
Rds On (Typ) |
55m Ω |
Height Seated (Max) |
0.55mm |
Length |
2mm |
Width |
2mm |
NCP380LMU20AATBG Overview
A Tape & Reel (TR) is used to package it.There is a package for it in the 6-UDFN Exposed Pad package.This lighting drivere has a mounting type of Surface Mount.It owns the General Purpose switch type.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.It produces a maximum output voltage of P-Channel volts at its maximum output.It is equipped with Slew Rate Controlled, Status Flag features.The NCP380 family contains this object.A total of 6 terminations have been recorded.The 6 pins are used for the operation of the system.As far as the lighting driver is concerned, there are 1 functions.There is a maximum output of 2AV from the LED driver.With a supply voltage of 5V, high efficiency is possible.It is mounted in the way of Surface Mount.This LED driver is equipped with a total of 6 pins.It has a resistance of 75mOhm.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 1 channels available.It is recommended to set the supply voltage to 5.5V for optimum efficiency.Input voltage is limited to 5.5V volts.It requires 2.5V volts as the minimum input voltage.It requires 90μA current to operate.
NCP380LMU20AATBG Features
Supplied from 5V
Resistance of 75mOhm
1 channels
NCP380LMU20AATBG Applications
There are a lot of ON Semiconductor NCP380LMU20AATBG Power Switches ICs applications.
- Hot-Swap Systems
- Telecom and Network Systems
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Smart Phones, Feature Phones
- PDAs
- Wireless/Networking Cards
- Various applications equipped with buttons
- PC Card Hot Swap