NCP380LMUAJAATBG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 110mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 830mW |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 2.1A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2.1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | Adjustable |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), UVLO |
| Rds On (Typ) | 55m Ω |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380LMUAJAATBG Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).The 6-UDFN Exposed Pad package includes it.The mounting type of the LED driver is Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.The LED driving board is powered by a voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.A lighting driver with Slew Rate Controlled, Status Flag features is available.The NCP380 family consists of this type.There are 6 terminations in it.In order to operate, 6 pins are used.It contains 1 functions.From the lighting driver, there is a maximum output of AdjustableV.To comply with the operation criteria, the maximum output current is reduced to 2.1A.Supply voltages of 5V allow for high efficiency.It is mounted in the way of Surface Mount.6 pins are equipped with it.It has a resistance of 110mOhm.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.In total, 1 channels are available.In order to maximize efficiency, the supply voltage should be set to 5.5V.Its maximum input voltage is 5.5V volts.It has a 2.5V volt minimum input voltage.We have available 2 inputs.
NCP380LMUAJAATBG Features
Supplied from 5V
Resistance of 110mOhm
1 channels
NCP380LMUAJAATBG Applications
There are a lot of ON Semiconductor NCP380LMUAJAATBG Power Switches ICs applications.
- Telecom and Network Systems
- HDD and SSD
- PC Cards
- Solid-State Drives
- Hot Swaps
- Low Voltage I/O System Power
- Notebook and Tablet Computers
- Gaming
- Notebook PC
- Portable Video Game Players
