NCP380LSN05AAT1G
| Parameters | |
|---|---|
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 325mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 500mA |
| Base Part Number | NCP380 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
NCP380LSN05AAT1G Overview
A Tape & Reel (TR) is used to package it.This file is included in package SOT-23-5 Thin, TSOT-23-5.The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.A maximum output voltage of P-Channel volts can be obtained with this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It belongs to the NCP380 family.It contains 5 terminations.The operation is carried out using the 5 pins.It contains 1 functions.To meet the operation criteria, the maximum output current drops to 1A.Supply voltages of 5V allow for high efficiency.The LED driving board is mounted in the way of Surface Mount.5 pins are connected to it in total.Currently, the LED driving board has a resistance of 135mOhm ohms.In this case, the output current will be set to 500mA.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.A total of 1 channels are available for you to choose from.For maximum efficiency, the supply voltage should be set to 5.5V.There is a maximum input voltage of 5.5V volts.The input voltage minimum is 2.5V volts.It has 2 inputs.
NCP380LSN05AAT1G Features
Supplied from 5V
Resistance of 135mOhm
1 channels
NCP380LSN05AAT1G Applications
There are a lot of ON Semiconductor NCP380LSN05AAT1G Power Switches ICs applications.
- Wearable Devices
- USB Protection
- Hard Disk Drives
- Smartphone and PDA
- Portable Devices
- HDD, SSD
- Portable/Handheld Devices
- Telecom and Network Systems
- Notebook PC
- Various applications equipped with buttons
