NCP380LSN10AAT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Resistance | 135mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 325mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Current Rating | 1A |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP380 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 4 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), UVLO |
| Rds On (Typ) | 70m Ω |
| Height | 1mm |
| Length | 3mm |
| Width | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP380LSN10AAT1G Overview
It is packaged in the manner of a Tape & Reel (TR).This package is included in SOT-23-5 Thin, TSOT-23-5.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It is a member of the NCP380 family.It contains 5 terminations.The 5 pins are used for the operation of the system.The LED driver has 1 functions.This results in the maximum output current dropping to 1A to meet the operation criteria.The supply voltage of 5V is conducive to high efficiency.This lighting driver is mounted in the way of Surface Mount.It is equipped with a total of 5 pins.In this LED driving board, there is 135mOhm resistance.It is set to 1A in this case.In this case, the analog IC in this gadget is POWER SUPPLY SUPPORT CIRCUIT.We offer 1 channels in total.The supply voltage should be set at 5.5V for best efficiency.Its maximum input voltage is 5.5V volts.It requires 2.5V volts as the minimum input voltage.2 inputs are provided.
NCP380LSN10AAT1G Features
Supplied from 5V
Resistance of 135mOhm
1 channels
NCP380LSN10AAT1G Applications
There are a lot of ON Semiconductor NCP380LSN10AAT1G Power Switches ICs applications.
- Hard Disk Drives
- PC Card Hot Swap
- Wearable Devices
- Gaming
- Wireless Modem Data Cards
- HDD and SSD
- Mobile Communication Devices
- Various applications equipped with buttons
- Hot Swaps
- Telecom and Network Systems
