Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 Thin, TSOT-23-6 |
Number of Pins |
6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Feature |
Slew Rate Controlled, Status Flag |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Resistance |
135mOhm |
Terminal Finish |
Tin (Sn) |
Max Power Dissipation |
350mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.95mm |
Current Rating |
2.1A |
Base Part Number |
NCP380 |
Pin Count |
6 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
1A |
Operating Supply Voltage |
5.5V |
Number of Channels |
1 |
Interface |
On/Off |
Analog IC - Other Type |
POWER SUPPLY SUPPORT CIRCUIT |
Current - Output (Max) |
Adjustable |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Adjustable Threshold |
YES |
Input Type |
Non-Inverting |
Turn On Delay Time |
4 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Number of Inputs |
2 |
Max Input Voltage |
5.5V |
Halogen Free |
Halogen Free |
Nominal Input Voltage |
5.5V |
Turn-Off Delay Time |
3 ms |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Adjustable), UVLO |
Rds On (Typ) |
70m Ω |
Height |
1mm |
Length |
3mm |
Width |
1.5mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
NCP380LSNAJAAT1G Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The SOT-23-6 Thin, TSOT-23-6 package contains it.The LED driver is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~85°C TA.In this LED driver, there are no outputs available.The LED driving board is powered by a voltage of Not Required.The maximum output voltage of this LED driver is P-Channel volts.A lighting driver with Slew Rate Controlled, Status Flag features is available.It belongs to the family NCP380.A total of 6 terminations can be found in it.For operation, 6 pins are used.Currently, there are 1 functions associated with the lighting driver.From the lighting driver, there is a maximum output of AdjustableV.To meet the operation criteria, the maximum output current drops to 1A.High efficiency is possible at 5V supply voltage.In this case, it is mounted in the way of Surface Mount.6 pins are equipped with it.135mOhm resistance is present in the lighting driver.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.When using this LED driving board, it is recommended that the supply voltage is set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.A minimum input voltage of 2.5V volts is required for this LED driver.Currently, there are 2 inputs available.
NCP380LSNAJAAT1G Features
Supplied from 5V
Resistance of 135mOhm
1 channels
NCP380LSNAJAAT1G Applications
There are a lot of ON Semiconductor NCP380LSNAJAAT1G Power Switches ICs applications.
- USB Protection
- Portable Video Game Players
- Gaming
- Telecom and Network Systems
- USB Power Distribution
- Storage Drives
- Mobile Communication Devices
- Various applications equipped with buttons
- Portable GPS
- Hot Swap