NCP382HD05AAR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 540.001716mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 570mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP382HD05AAR2G Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.This switch is of type General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 2 outputs.Operation is based on a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.As a result, there are 8 terminations.8 pins are used for operation.As far as functions are concerned, the lighting driver has 1.The maximum output current must drop to 500mA to meet the operation criteria.Supply voltages of 5V allow for high efficiency.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 8 pins.In this LED driving board, there is 80mOhm resistance.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.We currently have 2 channels available.
NCP382HD05AAR2G Features
Supplied from 5V
Resistance of 80mOhm
2 channels
NCP382HD05AAR2G Applications
There are a lot of ON Semiconductor NCP382HD05AAR2G Power Switches ICs applications.
- Gaming
- Smartphone and PDA
- Hot Swaps
- Hard Disk Drives
- Telecom and Network Systems
- Wearable Devices
- Portable Devices
- Portable GPS Device
- Solid State Drivers
- USB Protection
