NCP382LD05AAR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 80mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 570mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Output Current | 2A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 3 ms |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Turn-Off Delay Time | 3 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP382LD05AAR2G Overview
The package is in the form of a Tape & Reel (TR).In the 8-SOIC (0.154, 3.90mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The lighting driver has a total of 2 outputs that are available for use.A voltage of Not Required is used to power it.It has a maximum output voltage of P-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.As a result, there are 8 terminations.The 8 pins are used for the operation of the system.It consists of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.The supply voltage can be 5V for high efficiency.Surface Mount is mounted in the way of this LED driving board.It is equipped with a total of 8 pins.Currently, the LED driving board has a resistance of 80mOhm ohms.It is set to 2A in this case.In this case, Vsup (maximum supply voltage) is set to 5.5V.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.
NCP382LD05AAR2G Features
Supplied from 5V
Resistance of 80mOhm
2 channels
NCP382LD05AAR2G Applications
There are a lot of ON Semiconductor NCP382LD05AAR2G Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Protection
- Mobile Communication Devices
- Smartphone and PDA
- PC Card Hot Swap
- Gaming
- PDAs
- Portable GPS
- Portable Video Game Players
- Telecom and Network Systems
