NCP4300AD
| Parameters | |
|---|---|
| Frequency Compensation | YES |
| Low-Bias | NO |
| Micropower | NO |
| Bias Current-Max (IIB) @25C | 0.15μA |
| Programmable Power | NO |
| Input Bias Current | 150nA |
| Wideband | NO |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Amplifier |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 105°C |
| Min Operating Temperature | 0°C |
| Applications | Power Management |
| Packing Method | RAIL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP4300A |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 2 |
| Power Supplies | 5/30V |
| Temperature Grade | OTHER |
| Max Supply Voltage | 35V |
| Min Supply Voltage | 3V |
| Operating Supply Current | 420μA |
| Nominal Supply Current | 800μA |
| Output Current | 25mA |
| Slew Rate | 0.5 V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 40 dB |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 2mV |
| Gain Bandwidth Product | 700 kHz |
| Unity Gain BW-Nom | 700 kHz |
| Voltage Gain | 100dB |
| Average Bias Current-Max (IIB) | 0.15μA |
| Power Supply Rejection Ratio (PSRR) | 40dB |
| Low-Offset | NO |
NCP4300AD Overview
In order to house this device, it is enclosed in a Tube-package which is integrated with the device.The Amplifier offers excellent value for money.With the 8-SOIC (0.154, 3.90mm Width) package, this item will be dispatched.Mounting the part takes place in the direction of Surface Mount.Power Management is the most common place where it is used.Device NCP4300A is its base part number.It is used here to access high performance for amplification purposes by using the 2 functions.It is estimated that there are 8 terminals in total, each of which has its own function.There is a requirement that, when performing peak relow on the part, the iron temperature needs to be controlled under NOT SPECIFIED.There are 8 pins on the part in total.In order for this amplifier to operate efficiently, a supply voltage of 5V is recommended.You can use this amplifier for custom work.In the lowest temperature range of 0°C, the device can operate.Incredibly, this part is capable of operating at temperatures as high as 105°C.Surface Mount has been adapted to this product in order to enhance design flexibility.It is rated for a maximum supply voltage of 35V volts.Powered by at least 3V watts when supplied.With a voltage gain of 100dB of 100dB.9, this amplifier achieves excellent results.In order to power this part, you will need 5/30V power supplies.A supply current of 420μA is recommended for keeping the amplifier functioning properly.As a result of 2 basic elements, efficient amplification can be achieved.
NCP4300AD Features
NCP4300AD Applications
There are a lot of ON Semiconductor NCP4300AD Special Purpose Amplifiers applications.
- Portable media players
- Integrator and differentiator circuits
- Hand-held batteries
- Proportional operation circuits
- Industrial control system
- High-frequency data acquisition systems
- Gaming industry
- Automatic control
- Test and measurement instruments
- Power generator
