NCP433FCT2G

P-Channel PMIC 4 Pin 4-UFBGA, WLCSP

Manufacturer: ON Semiconductor
Nocochips NO: 598-NCP433FCT2G
Package: 4-UFBGA, WLCSP
Datasheet: PDF
Stock: 207
Description: P-Channel PMIC 4 Pin 4-UFBGA, WLCSP (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 2 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	4-UFBGA, WLCSP
Number of Pins	4
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Feature	Load Discharge, Slew Rate Controlled
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	50mOhm
Max Power Dissipation	500mW
Pin Count	4
Number of Outputs	1
Output Type	P-Channel
Max Output Current	1.5A
Interface	On/Off
Analog IC - Other Type	SPST
Output Configuration	High Side
Output Current	1.5A
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	115 μs
Switch Type	General Purpose
Nominal Input Voltage	3.6V
Turn-Off Delay Time	80 μs
Ratio - Input:Output	1:1
Voltage - Load	1V~3.6V
Rds On (Typ)	35m Ω
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

NCP433FCT2G Overview

As you can see, it's packaged in the way of a Tape & Reel (TR).This file is included in package 4-UFBGA, WLCSP.Surface Mount is the mounting type of the LED driver.It owns the General Purpose switch type.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.The LED driving board operates at Not Required volts.A maximum voltage of P-Channel volts is available from the output of this LED driver.There are Load Discharge, Slew Rate Controlled features available on the LED driving board.The 4 pins are used to operate the LED driver.This operation requires the maximum output current to be decreased to 1.5A.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.It has 50mOhm resistance.It is set to 1.5A in this case.There is an analog input IC in this gadget, which is SPST.