NCP434FCT2G
| Parameters | |
|---|---|
| Length | 0.96mm |
| Width | 0.96mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-UFBGA, WLCSP |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Peripheral Drivers |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 1V |
| Interface | On/Off |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1V~3.6V |
| Driver Number of Bits | 1 |
| Rds On (Typ) | 65m Ω |
| High Side Driver | YES |
| Height Seated (Max) | 0.63mm |
NCP434FCT2G Overview
It is packaged in the form of a Tape & Reel (TR).There is a 4-UFBGA, WLCSP package that includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the switch type it owns.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 1 outputs.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of P-Channel volts can be achieved by this LED driver.It is equipped with Slew Rate Controlled features.A total of 4 terminations have been recorded.For operation, 4 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 2A in order to meet the operation requirements.The supply voltage can be 3.3V for high efficiency.This lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 4 pins.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In this case, Vsup (maximum supply voltage) is set to 3.6V.The supply voltage (Vsup) should be kept above 1V for normal operation.
NCP434FCT2G Features
Supplied from 3.3V
NCP434FCT2G Applications
There are a lot of ON Semiconductor NCP434FCT2G Power Switches ICs applications.
- Gaming
- USB Ports/Hubs
- Portable GPS Device
- Smartphone and PDA
- Solid-State Drives
- USB Power Distribution
- Set-top-box
- Various applications equipped with buttons
- Portable Music Players
- Portable Devices
