NCP4545IMNTWG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 18-VFQFN Exposed Pad |
| Number of Pins | 18 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 18 |
| ECCN Code | EAR99 |
| Resistance | 7mOhm |
| Terminal Finish | Tin (Sn) |
| Power Rating | 1.98W |
| Max Power Dissipation | 1.98W |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 18 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Voltage | 5.5V |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 10.5A |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 525 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 6V |
| Turn-Off Delay Time | 2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 3V~5.5V |
| Rds On (Typ) | 4.9m Ω |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP4545IMNTWG Overview
The LED driver's packaged as a Tape & Reel (TR).Package 18-VFQFN Exposed Pad contains it.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.In order to guarantee reliable performance, the temperature should be set to 0°C~70°C TA.The lighting driver has a total of 1 outputs that are available for use.Operation is based on a supply voltage of Not Required.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.A total of 18 terminations have been recorded.For operation, 18 pins are used.It is important to note that the LED driving board has 1 functions.The maximum output current is reduced to 10.5A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.As a result, it is mounted in the manner of Surface Mount.There are 18 pins in total on this board.Lighting drivers with 7mOhm resistance are used.A component of this type is included in the ecoSWITCH? series.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels to choose from.A supply voltage of 5.5V is recommended for maximum efficiency.It has a maximum current requirement of 10.5A.
NCP4545IMNTWG Features
Supplied from 3.3V
Resistance of 7mOhm
1 channels
NCP4545IMNTWG Applications
There are a lot of ON Semiconductor NCP4545IMNTWG Power Switches ICs applications.
- Portable GPS
- Hot Swap
- Solid State Drivers
- Gaming
- Hot Swaps
- USB3.1 Power Delivery
- Wireless/Networking Cards
- Wireless Headsets
- HDD, SSD
- USB Power Distribution
