NCP45520IMNTWG-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Resistance | 12.8mOhm |
| Terminal Finish | Tin (Sn) |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 500μA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 10.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 12.8m Ω |
| Supply Voltage1-Nom | 1.8V |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 950μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45520IMNTWG-H Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 8-VFDFN Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of 3V~5.5V.There is a maximum output voltage of N-Channel volts.The lighting driver has Slew Rate Controlled features.A total of 8 terminations have been recorded.For operation, 8 pins are used.There are 1 functions of the LED driver.Maximum output current falls to 10.5A when operation criteria are met.With a supply voltage of 3.3V, high efficiency is possible.The lighting driver is mounted in the direction of Surface Mount.A total of 8 pins are present on it.It has a resistance of 12.8mOhm.A component of this type is included in the ecoSWITCH? series.It is set to 10.5A in this case.
NCP45520IMNTWG-H Features
Supplied from 3.3V
Resistance of 12.8mOhm
NCP45520IMNTWG-H Applications
There are a lot of ON Semiconductor NCP45520IMNTWG-H Power Switches ICs applications.
- HDD, SSD
- Portable Video Game Players
- Hot Swap
- Hot Swaps
- Wireless Headsets
- Wireless Modem Data Cards
- Hot Swap
- Portable/Handheld Devices
- Solid-State Drives
- Wireless/Networking Cards
