NCP45520IMNTWG-L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 500μA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 10.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 12.8m Ω |
| Supply Voltage1-Nom | 1.8V |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 950μm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45520IMNTWG-L Overview
The LED driver's packaged as a Tape & Reel (TR).This file is included in package 8-VFDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.A voltage of 3V~5.5V is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.It has a total of 8 terminations.For operation, we use the 8 pins.The LED driving board has a total of 1 functions.Maximum output current falls to 10.5A when operation criteria are met.As long as the supply voltage is 3.3V, high efficiency can be achieved.The LED driving board is mounted in the way of Surface Mount.A total of 8 pins are included in this LED driver.These electrical components are part of the ecoSWITCH? series.In this case, the output current is set to 10.5A.
NCP45520IMNTWG-L Features
Supplied from 3.3V
NCP45520IMNTWG-L Applications
There are a lot of ON Semiconductor NCP45520IMNTWG-L Power Switches ICs applications.
- Handheld Devices
- Portable Devices
- Portable/Handheld Devices
- Wireless/Networking Cards
- USB Power Distribution
- Hot Swaps
- Smart Phones, Feature Phones
- HDD and SSD
- Set-top-box
- Set-Top Boxes
