NCP45521IMNTWG-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Resistance | 22.5mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Operating Supply Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 500μA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 10.5A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Max Supply Current | 10.5A |
| Input Type | Non-Inverting |
| Turn On Delay Time | 270 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 1.2 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 12.8m Ω |
| Supply Voltage1-Nom | 1.8V |
| Max Junction Temperature (Tj) | 125°C |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Ambient Temperature Range High | 85°C |
| Supply Voltage1-Min | 0.5V |
| Height | 1mm |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45521IMNTWG-H Overview
It is packaged in the manner of a Tape & Reel (TR).It is included in the package 8-VFDFN Exposed Pad.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type it owns.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.The LED driver has 1 outputs.Operation is based on 3V~5.5V supply voltage.The maximum output voltage is N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled features.It contains 8 terminations.During operation, the 8 pins are used.It is important to note that the LED driving board has 1 functions.This results in the maximum output current dropping to 10.5A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.It is mounted in the way of Surface Mount.In total, it has 8 pins.There is 22.5mOhm resistance on the LED driver.It is part of the ecoSWITCH? series.When this is the case, the output current is set to 10.5A.It is recommended to set the supply voltage to 5.5V for optimum efficiency.It requires a maximum current requirement of 10.5A.
NCP45521IMNTWG-H Features
Supplied from 3.3V
Resistance of 22.5mOhm
NCP45521IMNTWG-H Applications
There are a lot of ON Semiconductor NCP45521IMNTWG-H Power Switches ICs applications.
- Portable Music Players
- Hot Swaps
- PC Cards
- Notebook PC
- Hot-Swap Systems
- USB Power Distribution
- Hot Swap
- Portable/Handheld Devices
- Portable GPS Device
- Set-top-box
