NCP45521IMNTWG-L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Power Rating | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 10.5A |
| Voltage | 5.5V |
| Interface | On/Off |
| Nominal Supply Current | 500μA |
| Current | 750A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Fault Protection | Over Temperature, UVLO |
| Rds On (Typ) | 12.8m Ω |
| Supply Voltage1-Nom | 1.8V |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 950μm |
| Length | 1mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45521IMNTWG-L Overview
It is package in Tape & Reel (TR) case.In the 8-VFDFN Exposed Pad package, it is included.Surface Mount is the mounting type of the LED driver.The switch type of this switch is General Purpose.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.In order to operate, it requires a voltage supply of 3V~5.5V.There is a maximum output voltage of N-Channel volts.Slew Rate Controlled features are available on the lighting driver.It contains 8 terminations.In order to operate, 8 pins are used.It has 1 functions.The maximum output current is reduced to 10.5A to meet the operation criteria.With a supply voltage of 3.3V, high efficiency is possible.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 8 pins.Electrical components such as this are included in the ecoSWITCH? series.
NCP45521IMNTWG-L Features
Supplied from 3.3V
NCP45521IMNTWG-L Applications
There are a lot of ON Semiconductor NCP45521IMNTWG-L Power Switches ICs applications.
- Hard Disk Drives
- Portable GPS Device
- Portable Video Game Players
- Wireless/Networking Cards
- Solid State Drivers
- USB Power Distribution
- USB Power Distribution
- Portable GPS
- Gaming
- Smartphone and PDA
