NCP45524IMNTWG-H
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Power Good |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Resistance | 21.9mOhm |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 475μA |
| Output Configuration | High Side |
| Power Dissipation | 2.5W |
| Output Current | 6A |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 260 μs |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Turn-Off Delay Time | 200 ns |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Rds On (Typ) | 18m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45524IMNTWG-H Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).In the 8-VFDFN Exposed Pad package, it is included.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on 3V~5.5V supply voltage.A maximum output voltage of N-Channel volts can be obtained with this LED driver.The lighting driver has Power Good features.There are 8 terminations in it.The 8 pins are used for the operation of the system.It has 1 functions.This results in the maximum output current dropping to 6A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way of this lighting driver.The LED driving board is equipped with a total of 8 pins.The LED driver has 21.9mOhm resistance.The ecoSWITCH? series includes this electrical component.When this case is used, the output current is set to 6A.The maximum supply voltage is set to 5.5V.For normal operation, the supply voltage (Vsup) should be kept above 3V.The analog IC used in this lighting driver is SPST.The total number of channels is 1.
NCP45524IMNTWG-H Features
Supplied from 3.3V
Resistance of 21.9mOhm
1 channels
NCP45524IMNTWG-H Applications
There are a lot of ON Semiconductor NCP45524IMNTWG-H Power Switches ICs applications.
- Telecom and Network Systems
- Wireless/Networking Cards
- PDAs
- Set-Top Boxes
- Notebook PC
- Storage Drives
- Hot-Swap Systems
- Solid-State Drives
- HDD, SSD
- Smart Phones, Feature Phones
