NCP45524IMNTWG-L
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | ecoSWITCH™ |
| JESD-609 Code | e3 |
| Feature | Power Good |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | Tin (Sn) |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | SPST |
| Nominal Supply Current | 475μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 3V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 13.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.5V~13.5V |
| Rds On (Typ) | 18m Ω |
| Length | 2mm |
| Width | 2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP45524IMNTWG-L Overview
Tape & Reel (TR) is how it's packaged.Package 8-VFDFN Exposed Pad contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver is equipped with 1 outputs.Operation is based on a supply voltage of 3V~5.5V.Voltage output is N-Channel volts at maximum.A lighting driver with Power Good features is available.It has a total of 8 terminations.For operation, 8 pins are used.It contains 1 functions.This operation requires the maximum output current to be decreased to 6A.A supply voltage of 3.3V leads to high efficiency.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 8 pins.It is included in the ecoSWITCH? series.The maximum supply voltage for this lighting driver is set to 5.5V (Vsup).The supply voltage (Vsup) should be kept above 3V for normal operation.This LED driving board uses an analog IC SPST.There are a total of 1 channels to choose from.
NCP45524IMNTWG-L Features
Supplied from 3.3V
1 channels
NCP45524IMNTWG-L Applications
There are a lot of ON Semiconductor NCP45524IMNTWG-L Power Switches ICs applications.
- USB Protection
- Hot Swap
- Smart Phones, Feature Phones
- Various applications equipped with buttons
- Hot Swap
- Wireless Headsets
- Storage Drives
- USB Power Distribution
- Portable Music Players
- Notebook PC
