banner_page

NCP45525IMNTWG-L

N-Channel 0.5mm PMIC ecoSWITCH? Series 8 Pin 3.3V 8-VFDFN Exposed Pad


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP45525IMNTWG-L
  • Package: 8-VFDFN Exposed Pad
  • Datasheet: PDF
  • Stock: 184
  • Description: N-Channel 0.5mm PMIC ecoSWITCH? Series 8 Pin 3.3V 8-VFDFN Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-VFDFN Exposed Pad
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2013
Series ecoSWITCH™
JESD-609 Code e3
Feature Slew Rate Controlled
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
Terminal Finish Tin (Sn)
Max Power Dissipation 2.5W
Terminal Position DUAL
Number of Functions 1
Supply Voltage 3.3V
Terminal Pitch 0.5mm
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 6A
Supply Voltage-Max (Vsup) 5.5V
Supply Voltage-Min (Vsup) 3V
Number of Channels 1
Interface On/Off
Analog IC - Other Type SPST
Nominal Supply Current 475μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 3V~5.5V
Input Type Non-Inverting
Switch Type General Purpose
Halogen Free Halogen Free
Ratio - Input:Output 1:1
Voltage - Load 0.5V~13.5V
Rds On (Typ) 18m Ω
Length 2mm
Width 2mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP45525IMNTWG-L Overview


The LED driver's packaged as a Tape & Reel (TR).The 8-VFDFN Exposed Pad package includes it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of 3V~5.5V.There is a maximum output voltage of N-Channel volts on this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled features.In total, there are 8 terminations.In order to operate, 8 pins are used.Currently, there are 1 functions associated with the lighting driver.As a result, the maximum output current is reduced to 6A in order to meet the operation requirements.The supply voltage can be 3.3V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.8 pins are equipped with it.This electrical component can be found in the ecoSWITCH? series.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for this lighting driver to operate normally, the supply voltage (Vsup) should remain above 3V.In this case, the analog IC is SPST.There are a total of 1 available channels.

NCP45525IMNTWG-L Features


Supplied from 3.3V
1 channels

NCP45525IMNTWG-L Applications


There are a lot of ON Semiconductor NCP45525IMNTWG-L Power Switches ICs applications.

  • Hot Swaps
  • Mobile Communication Devices
  • USB Power Distribution
  • Solid-State Drives
  • PC Cards
  • Storage (HDDs, SSDs)
  • USB Protection
  • Various applications equipped with buttons
  • PDAs
  • Hot Swap

Write a review

Note: HTML is not translated!
    Bad           Good